Aeolus Filter³ media achieves unparalleled energy efficiency, life cycle and durability without the need for artificial attractants, such as electrostatic enhancement.

This patented single-step production process results in a three-dimensional web of thick and thin fibers.  Naturally attracted to matter of similar diameter, particles are trapped within the three-dimensional web of microfibers.

• Naturally attracted to matter of similar diameter, particles are trapped within the three-dimensional web of microfibers.
• Each individual fiber strand on our MERV 8 - 13 filters measures between 2 and 20 microns in diameter.
• Enmeshed with Nanofibers, aeotec nanofiltration media captures particles as small as one-thousandth of a micron.

1. Attract particles of similar dimensions.
   Naturally attracted to matter of similar diameter, particles are trapped within a three-dimensional web of microfibers.  Each individual fiber strand on our MERV 8 - 13 filters measures between 2 and 20 microns in diameter. Enmeshed with Nanofibers, aeotec nanofiltration media captures particles as small as one-thousandth of a micron.
2. Capture particles inside the filter, not just on the surface.
   Thanks to the 3-D web of fibers, the aeolus filter3 traps particles are trapped within the filter, not just at the surface. Many competing filters trap particles only at the surface.
3. Maintain filter form under pressure.
   Durable enough to stand on, our filter media does not lose its shape over time.
4. Avoid the buildup of micro-organisms.
   Aeolus synthetic media is non-shedding, hydrophobic and virtually water-proff. Aeolus media does not support the growth of microorganisms such as bacteria, mold, and fungi.

Frame material for the Synthetic Mini-pleat Panel filter is rigid polypropylene foam board.

• It is waterproof, impact resistant, resistant to most chemicals, and will not rust or corrode. The rigid foam board is formed into a U-channel and wrapped around the perimeter of the media pack. Frame and media pack are bonded together with a thermo-plastic adhesive.
• Neither the adhesive or frame parts are affected by water and by nature do not support the growth of microbial organisms such as bacteria, mold, fungi, etc.

Frame Technology used in the SMV Products (Synthetic Mini-pleat V-Cell)
Frames are injection molded from 100% polypropylene.

• Frames are water proof, impact resistant, resistant to most chemicals, and will not rust or corrode.
• Media packs and frame components are bonded together with a waterproof thermo-plastic adhesive.
• Neither the adhesive or frame parts are affected by water and by nature do not support the growth of microbial organisms such as bacteria, mold, fungi, etc.

All plastic construction. Media and frames are polypropylene. Plastic hot melt adhesive used for bonding pleat packs toframe. Available in efficiency grades from ASHRAE MERV 8 to MERV 15 (30-95%+). A truly innovative and unique minipleat design concept. Engineered for exceptional performance and durability in a v-bank configuration.

Standard Nominal Sizes Available

• 24×24x12
• 24×12x12
• 24×20x12

Benefits

• High efficiency
• High airflow capacity
• Durable, damage resistant media packs
• Light weight
• Resistant to most chemicals
• Can be incinerated for disposal
• Low airflow resistance
• Longer service life
• Moisture-proof construction
• Will not corrode
• Will not support microbial growth

Typical Applications

• Hospitals and Heath Care Facilities
• Micro Processor Manufacturing
• Pre-Filters for Clean Rooms
• Food Processing
• Pharmaceutical Manufacturing
• Educational Institutions
• Industrial and Commercial Buildings
• Gas Turbine Intake Systems
• Turbulent Airflow
• High Humidity
• Variable Air Volume
• High Velocity Airflow

Our Mini-pleat pack in 1, 2, 4 or 6 inches is your choice when you need high efficiency filtration in a small design.

• Underwriters Laboratories Classification - UL900 Class I U.S. - Class II Canada
• Inorganic construction will not promote microbial growth
• Continuous operating temperature limitations: 180° F (82° C)
• Filters can be operated up to 125% of manufacturers rated airflow
• Manufacturers recommended final resistance is 1.50″ W.G.

 Available sizes:

• 1-inch
• 2-inch
• 4-inch
• 4-inch-hd
• 6-inch-hd